ShenZhen GuoHao Communication Technology Co.,Ltd.

Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]

10/100/1000m media converter
Specification: 155 (L) x 130 (W) x 30mm(H)
Detail: Features:1) Compliant with IEEE802.3ab 1000 BASE-T standards for TP connection and IEEE802.3z 1000BASE-SX/LX standards for fiber connection2) Provides fiber-optic port with SC connector3) Extended fiber optic distance up to 55...

2u media converter rack
Specification: 430mm*310mm*91mm
Detail: The rack has 16 slots and can insert various sort 2U media converter module. The power is backup 1+1.

single mode to multi mode media converter
Specification: GH-EC Series
Detail: Data transmit distance: 155Mbps, 62Mbps, 1.25Gbps Light material: transmit LED / ELED / LASER receiver PIN Diode multi mode:850nm/1310nm single mode:1310nm/1550nm Connector: ST, FC, SC Indication light: MM RX, MM TX, S...

10/100m media converter
Specification: 160 (L) x 120 (W) x 30mm(H)
Detail: Features:1) Compliant with IEEE802.3 10 Base-T and IEEE802.3u 100 Base-TX/FX standards 2) Supports auto-negotiation functions in TP port to ***ect speed (10/100M) and duplex mode (full/half) automatically3) Supports auto uplin...

8e1 pdh multiplexer
Specification: 44 (L) x 21.5 (W) x 4cm(H)
Detail: Features:1) High integrate design, work stabile, very low failure rate2) E1 port uses digital clock resume circuit and digital phase-lock circuit3) Voltage can select DC-48 or AC220V, provides over-voltage and over-current pro...

four rj-45 media converter
Specification: GH-EC Series Media Converter
Detail: E1 interface: Comply IEEE802.3,IEEE802.3u,IEEE802.3x Rate: 10/100Mbps, half / full duplex auto-negotiation Interface: RJ45 Distance: multi mode: 2Km single mode: up to 100km. Fiber interface: Comply 10Base...

4e1 pdh multiplexer
Specification: 44 (L) x 21.5 (W) x 4cm(H)
Detail: Features:1) High integrate design, work stabile, very low failure rate2) E1 port uses digital clock resume circuit and digital phase-lock circuit3) Voltage can select DC-48 or AC220V, provides over-voltage and over-current pro...

e1-v.35 protocol converter
Specification: 220 (L) x 160 (W) x 35mm(H)
Detail: Features: 1) Can realize tran***rent transmission in E1, bandwidth is 2048KBps 2) Supports 75¦¸ (unbalance) and 120¦¸ (balance) 3) Based on self copyright IC, main chip self-copyright 4) Matches ITU-T V.35, G.703, G.704...

e1-10base-t protocol converter
Specification: GH-DH2010,GH-DH6410
Detail: Features: 1) Realizes tran***rent transport of Ethernet data in E1 route, bandwidth is 2,048Kbps 2) Doesn't need any setup and debugging 3) Supports full/half duplex auto-negotiation 4) Can transmit longest fram...


Showing 11 - 20 of 20, total 2 pages [First] [Previous] [Next] [Last]
1 2